The skirt itself is pretty basic to put together, and following the instructions was super simple. From top to bottom, the pieces are: the waistband (a long rectangle) the yoke (the fitted part over the hips, basically slightly curved rectangles) the gathered skirt (straight rectangles, stitched into a loop. A long stitch along the top, pull one of the threads to gather the fabric, and stitch into the yoke.), and the pleats. It is the pleats I will cover today. They are simple, but time consuming. They were 6 out of the 9 hours I spent on the skirt.
Starting with a long strip of material, I marked out the pleats in 1" intervals, all the way along the strip. It is much easier to mark everything with your pencil and ruler, instead of eyeballing your 1" pleats. This ensures that they are evenly spaced all the way around.
My pencil might be really old and brittle, or just crappy, but it kept breaking. I used a different one, and it kept breaking. Frustrated, I finally grabbed a white ordinary pencil crayon, and it worked like a charm. Only after I finished everything, and had to try to remove those marks, did I realize the error I had made. Fabric marking pencils are designed to rub away easily (if you are handling your material a lot, that is a pain, and you have to keep remarking everything over and over) and pencil crayons are not... All of my marks are on the outside, not the inside, so they are highly visible! I have had several sessions of scrubbing to remove the pencil lines.... I am sure that washing would remove them quickly, but it would also remove my starch, and I would have to pin and restarch them... Not sure which will take more time... Lesson: if you are going to use regular pencil crayons, put your marks where you will not see them on the finished garment, or you will be doing a lot of scrubbing.
Next, I gathered each pleat, and pinned it into place. For this width of material, I used three pins for each pleat, one on each end, and one in the middle. This is also where I put my marks, to make sure that the entire length of the pleat would be even.
I continued for hours, taking short breaks to stretch my back and grab some tea. The finished product weighed a fair bit, and about half of that was probably pins!!
Once all the pleats were pinned, I sprayed the inside with starch. Unlike the pencil, I thought ahead on this one. I wasn't sure if the starch would leave a white residue. I tried a test on a scrap of fabric, and no marks were left, but I figured I would be safe anyway, and spray the inside.
Spraying and ironing small sections at a time, I worked my way around the loop. The pattern didn't call for starch, but I felt that the pleats would look much sharper and hold their shape all day if I did.
After starching, I stitched my pleats to the bottom of the skirt, and I was done!
You can see it fits quite high on the waist, but that is nice. Once I have the bodice on, you won't see the yoke at all, and the zipper in the back will be almost completely hidden. With the jacket on, you would never know that the skirt is closed with a zipper.
I will see how the final fit is, and if the back could use more poof, I will add a small bumroll, or perhaps a small bustle pad. I have a feeling I will have extra material left over, and if I do, I might even add a detachable bustle for the days when I am feeling especially extravagant. Being removable, I can dress the skirt up or down according to the occasion.
That is all for today. I have started work on the jacket. So far the lining is finished, and my sleeves went in the right way on the first try!! Zippers, sleeves, and buttonholes... my three most dreaded things! Tonight, I will tackle the outside of the jacket.