Wraith Queen: The Bodice - Step Four

Once the surface details were finished I began working on the tabs along the top. First I cut out rectangles, about 2" x 1", with rounded corners on one end.

Using one piece, I marked the location and depth of each tab along the top, keeping my spacing even.

I then glued all the tabs in place.

Once the glue set, I ran a stitch all the way across, firmly attaching the tabs in their place. Using a hole punch, I then put a small hole in the top and base of each tab, and inserted the white brads I had used in the head piece.

The exterior of the bodice is finished! Next up: the inside (that blue test run I did a couple of weeks ago)

Time is quickly running out to get this project finished. I need to be ready to wear by Friday, when we drive to Edmonton for Pure Speculation. I began as a volunteer there several years ago, and have watched it grow. Last year I went as a pirate, a chance to wear my costume for the second time (the first time being my own stagette!), and in the years that I volunteered, I was a Klingon. 

Without further ado, I will get back to my sewing!